The Ali
The Ali
The Ali
The Ali
The Ali
The Ali
The Ali
The Ali
The Ali
The Ali
The Ali
The Ali
The Ali

Ali TRU 28563RH Home

This is the best value in the Manufactured Home Industry. Everything in this home is designed and engineered to keep the value high while driving the costs down. Every room in the home is very large and spacious. This home may be stretched and built as a 4 bedroom and the engineering and drawing costs have already been completed. The home is available for the 575 Financing program.

Pricing

Base: $46,997
* Includes delivery in Ohio

Size

28 x 60

General

  • Unitized Construction
  • HUD Code
  • 20 lb. Roof Load Std., 30 psf optional
  • Thermal Zone 1 Std., zones 2 and 3 optional
  • Wind Zone 1 Std., zones 2 and 3 optional

Frame

  • I Beam: 12” or 10” model specific
  • Outriggers: 96” spacing, recessed 10” (approx)
  • Crossmembers: 96” spacing
  • Header (Front/Rear): Flush, not recessed
  • Axles: Spread (no equalizers) overslung mounted.
  • Brake Axles: One, except where more are mandatory by state DOT
  • Hitch Beam: 10” or 8” model specific
  • Hitch: Detachable

Floor

  • Joists: 2x6 / 19.2” O.C.
  • Carpet: Factory Select
  • Carpet Bar: None (tuck and staple at mate line)
  • Pad: 3.5 lb. (minimum) Rebond Pad
  • Vinyl: Factory Select
  • Decking: 19/32” 4x8 OSB T&G

Exterior (7’0” Sidewalls)

  • Vinyl Siding: Standard
  • Sheathing: WZ 1 Foam standard, plant specific brand. WZ 2 & 3 Includes OSB
  • Shutters: Front door side windows

Windows & Doors

  • Front door: House type door w/ storm
  • Rear door: Out swing 32” x 76” Blank, no storm.
  • Interior doors: Factory Select
  • Windows: Metal single glaze, size per prints.
  • Metal storm window options for thermal zone 2 and 3 only.

Roof / Ceiling

  • Design Load: 20 psf Live load standard, 30 psf options where needed
  • Shingles: 20 year
  • Trusses: 24” O.C. spacing
  • Sheathing: 7/16” OSB
  • Insulation: Blown Fiberglass
  • Ceiling: Textured
  • Ceiling Slope: Vault/Flat Ceiling
  • Attic Ventilation: Soffit vents (low), Ridge vent high

Plumbing

  • Water Heater: 40 gallon electric
  • Kitchen Sink: Stainless Steel, dbl bowl
  • Lavatory Sinks: Plastic
  • Faucets: Plastic
  • Master Bath: 54” Garden Tub ABS Plastic Tub
  • Hall Bath: 54” ABS Plastic Tub

Hvac

  • Heat: Electric Furnace (gas optional)
  • Ductwork: Metal duct
  • Thermostat: 8 Wire

Electrical

  • Load Center: 200 amp
  • (100 amp allowed when gas option ordered – gas range and gas furnace).
  • Exterior Receptacles and Switches: (1) GFI recept and cover.
  • Interior Receptacles and Switches: white, self contained
  • Phone Jack(s): None
  • AC: Conduit

Walls

  • Exterior Wall Construction: 2x4, 16” O.C. spacing
  • Exterior Wall Height Sidewall = 7’0”
  • Interior Wall Construction: 2x3 studs 24 O.C.
  • Marriage Wall: 2x3 Studs spaced 24” O.C.
  • Wall Coverings: 5/16” minimum VOG or paper on gyp
  • Wall Coverage at Closets: 5/16” gyp, raw

Interior Features

  • Cabinets: MDF / 24” tall overheads
  • Countertops (All): Formica
  • Backsplash: None
  • Closet Shelving: Closet Maid – vinyl wrapped metal.
  • Refrigerator: 18 CF
  • Range: Electric, Gas optional
  • Range Hood: 30”, 100 cfm min, vent through sidewall.
  • Valance on all windows. No mini blinds.
  • Island in Kitchen: Standard

Thermal (Insulation and Window Specs)

  • Zone I (standard) Windows: Metal (mil finish), single pane (no storm),
  • Floor: R11 Wall: R11 Roof: R14
  • Zone II (optional) Windows: Metal (mil finish) single pane w/ storm,
  • Floor: R11 Wall: R11 Roof: R21
  • Zone III (optional) Windows: Metal (mil finish) single pane w/ storm,
  • Floor: R22 Wall: R11 Roof: R28